What is the wall sticker made of?
The sticker is made of an aluminium substrate and a non-slip surface with reflective properties. This means the graphic is durable, easy to use, and highly visible.
Will the graphic stick out of the wall?
No. The material is designed with the intention of being smooth and conforming to any surface it is applied to.
Is a wall sticker the same as wall graphics and wall decals?
Yes. These are just some of the many possible names for a wall sticker. We also offer other similar products such as printed wallpaper, check out our wall graphics
to see the full range.
What shapes can I have cut?
You can have (almost) any shape imaginable. We can contour cut your final design for an additional cost to create a dynamic and detailed look, however we recommend simpler shapes for ease of application.
Is there a maximum size I can order?
In terms of maximum size we can print 53 inches (1346mm) on any one side and it can be up to 150 feet on the other, but multiple graphics can easily be butted together for extended designs.
What will the unprinted material look like?
Any unprinted material will be glossy white and highly reflective (creating three times the light than a small LED torch).
Is it weather resistant?
Highly. The material itself is a rugged and durable one, allowing for resistance in even the toughest of weather conditions, making it suitable for outdoor use. Please note that it must be applied to surfaces over 0°C, and will need to be within -40°C to 80°C once applied.
Will the sticker apply to uneven surfaces?
Yes. Thanks to the aluminium substrate the material will effortlessly conform to almost any uneven surface it is applied to.
How long will the wall sticker last?
If taken care of and is under not tampered with the wall sticker can easily last up to 2 years outdoors, and over 3 years if applied indoors.
After removing will there be a residue?
Once you have removed the decal there should be little to no residue remaining. However, in the case of application to a painted wall, there may be a residue and/or damage to the paint.
What surfaces am I able to apply the wall sticker on?
The wall sticker is intended to be used with masonry surfaces such as; concrete, brick, tiles, and industrial blocks and stone, however, can also work with metal, glass, and painted walls as long as care is taken.
Where and how might I use this product?
This wall sticker can have a wide array of recommended uses, such as; for factory signage, warehouses, car parks, businesses, bus stops, train stations, and university campuses. But can be used for much more, and even for personal use.
How do I install the wall sticker?
Simply clean the surface to ensure it is free of any debris, dirt, or grime that may stop the adhesive working. A hose or power washer should be suitable. Then once the surface is completely dry remove the backing and lay upon the surface, pressing firmly to ensure full application. We recommend the use of a hand roller for ease but this is not required. For larger decals we recommended another set of hands or more, just to make the process easier, and the final result smoother. After 24 hours the adhesive should be completely set. Check out our installation PDF guide
for further information.
How do I discard of the wall sticker after use?
Just peel off the sticker, starting at any corner and peel away from the applied surface. Once removed place in the recycling (anywhere that accepts aluminium) as this product is 100% recyclable.
Am I able to clean the wall sticker?
Yes. We recommend the use of a soft cloth and warm water to avoid damaging the graphic. However, you can also use a low powered hose or pressure washer from a distance of 3 feet or more. Avoid anything with high pressure or the use of anything abrasive.